Paper Tube Manufacturing Machines

This heavy duty paper slitter rewinder is fabricated in mild steel. Paper slitting machine has a sturdy construction and requires minimum maintenance. The paper reels draws through centrifugal clutches and tight rewinding is done through a gear design. The paper slitter rewinder machine can slit paper ranging from 180 to 400 gsm.

Slitting Arrangement	12 sets of knives each at the top and bottom
Production capacity	1 Metric tonne paper (400 gsm) per day
Total power requirement	3 HP AC motor
Labour requirement	1 Person
Minimum slit width	30 mm
Maximum reel width	1050 mm
Maximum rewind dia	800 mm

Yes! I am Interested

This machine is fabricated in MS angle and channel. It has two plastic spools per reel which unwind the paper without any interruption. After the unwinding, the material goes to the Glue Applicator.

Maximum reel width	200 mm
Maximum reel dia	800 mm
Labour requirement	1 Person

Yes! I am Interested

This machine is fabricated in MS angle with an outer MS shell and Stainless Steel inner tank. The heaters are fitted in the external shell. The mixing of the glue with water and the heating takes place simultaneously.

There is a thermostat for control of temperature and a digital temperature meter. This enables automatic switch off and on after the set temperature is reached which results in power saving. There is a water level indicator with a safety valve.

Production capacity	100 kg
Total power requirement	1 HP AC motor with a gear box
Heating capacity	2 kW x 3 nos
Labour requirement	1 Person

Yes! I am Interested

This machine is fabricated in heavy duty structural mild steel with powder coated enclosure and has a winding mandrel. A suitable Variac drive unit with a remote panel ergonomically facilitates the operation. It has a sturdy construction and once it is set up requires minimum intervention and maintenance.

Production capacity	20 dia to 305 mm dia paper tubes
Wall thickness of tubes	3 to 19 mm
Production speed	5 to 15 feet per minute
Total power requirement	5 to 15 HP DC motor with a gear reducer
Labour requirement	1 Person

Yes! I am Interested

The control panel synchronizes the machine with the Spiral Paper Tube Winder by the springs and limit switch signals. It does rough cutting and makes the cores ready for the next cycle. The machine has anti-vibration mounts and requires a helper.

Cutting length	1000 to 3500 mm paper tubes
Wall thickness of tubes	3 to 19 mm
Production speed	5 to 15 feet per minute
Total power requirement	2 HP AC motor
Dust Collector	0.5 HP AC motor
Labour requirement	1 Person

Yes! I am Interested

This machine is designed and fabricated in heavy duty structural mild steel to withstand vibrations. The machine does fine cutting pneumatically with the help of a hand lever valve and makes the paper tubes and cores ready for packing. The machine can also be fabricated with a multi-cutting attachment.

Minimum cutting length	50 mm paper tubes
Maximum cutting length	2000 mm paper tubes
Total power requirement	2 HP AC motor
Labour requirement	1 Person

Yes! I am Interested